Solid walls, cavity walls, blocked gutters and raised ground levels: how rain gets into British homes, and what a damp specialist can do about it.

Penetrating damp occurs when rainwater from outside finds its way through the walls of your home and into the interior. Unlike rising damp, which travels up from the ground, penetrating damp comes in sideways or downwards, usually after rain. It shows up as damp patches, peeling paint, stained plaster, mould and a persistent musty smell, and left alone it can damage plaster, decorations and even structural timbers. At Wessex Damp and Timber, we diagnose and treat penetrating damp, condensation and timber decay in homes across the Wessex region.

Penetrating damp in solid walls

Many older properties have solid walls, built from brick or stone with no cavity. Water that soaks into the outer face has a direct route inward, and the thicker the wall, the longer it takes to dry. Worn pointing, cracked render, porous or spalling brickwork and failed sealants around windows and doors all let moisture in. Over time the wall becomes saturated, and the damp shows on the inside face as tide marks and damp patches that often worsen in wet weather.

Solid walls need to breathe. Hard cement renders, impermeable paints and the wrong kind of repair can trap moisture inside the wall and make matters worse, so correct diagnosis and breathable repairs matter.

Of course, a period property that has had many remedial works over the years cannot always be returned to a breathable state. Decades of cement render, impermeable paints and previous repairs can make full restoration neither practical nor financially viable. In these cases, we can often find a sympathetic solution that provides a dry, blemish-free interior without the need to remortgage your home to pay for repairs!

Cavity walls, condensation and mould

Cavity walls are designed to stop water reaching the inside of the home. Rain that passes the outer leaf should drain down the cavity and away, rather than crossing to the inner wall. However, when the outer leaf stays wet for long periods, a cavity wall can still cause trouble. A wet masonry wall conducts heat away far faster than a dry one, so the inner surface becomes colder. Warm, moist indoor air meets that cold surface and condenses, leading to damp patches and black mould that are often mistaken for penetrating damp.

Where cavities are bridged by debris, mortar droppings or poorly fitted insulation, water can also cross to the inner leaf. Identifying whether you have true water ingress, condensation, or a combination of the two is essential before any treatment is chosen.

Damp rarely fixes itself. The sooner the source is found, the smaller the repair bill.

Failing gutters and rainwater goods

Gutters, downpipes and hoppers are your home’s first line of defence. When they leak, overflow or become blocked by leaves and moss, water runs down the face of the wall instead of away from it. This repeatedly saturates one area of brickwork and produces the localised damp patches, green algae and staining so often seen beneath a failed joint or blocked gutter. Cracked or misaligned downpipes and leaking gullies can also discharge water straight at the foot of the wall. Regular clearing and prompt repair of rainwater goods is one of the cheapest ways to prevent damp.

Raised external ground levels and bridged damp-proof courses

Patios, paths, flower beds and driveways are often raised over the years, until they sit higher than the internal floor or bridge the damp-proof course (DPC). When soil or paving is level with, or above, the DPC, moisture can pass straight into the wall above it, and rain splashing back from hard surfaces adds to the problem. Lowering external ground levels, or providing drainage such as a French drain, helps keep water away from the wall and allows it to dry.

Signs of penetrating damp

  • Damp or discoloured patches that grow after heavy rain.
  • Peeling paint, blown plaster or stained wallpaper.
  • Mould growth on cold external walls
  • A persistent musty smell
  • Green staining or damp on the outside face of the wall, especially below gutters

Book a professional damp survey with Wessex Damp and Timber

Damp problems rarely get better on their own, and the right fix depends on finding the true cause. Our experienced surveyors will inspect your property, identify whether you are dealing with penetrating damp, condensation or something else, and recommend a clear, practical solution.

Contact Wessex Damp and Timber today to book your damp survey and get expert damp proofing advice before the problem gets worse.

LEAVE A COMMENT

Your email address will not be published. Required fields are marked *